On this page
A home inspection is a paid, independent look at a house’s condition that the buyer orders, usually after the seller accepts the offer and before closing. FHA, VA and USDA do not require a buyer to get one. However, FHA tells lenders to hand every prospective FHA homebuyer a HUD form that urges one, and an appraisal does not replace it.
Think of the inspection as a form of insurance. You spend a few hundred dollars, and in return you learn what needs fixing now, what will need repair or replacement later, and where you have room to negotiate. This guide covers what an inspector checks, what it costs, how to pick one and what to do with the report. It also explains hidden hazards, such as Chinese drywall and radon, that a standard visit may not test for. For the full buying process, see our first-time buyer’s guide to buying a home.
Why get a home inspection
An appraisal and an inspection answer different questions. The appraiser estimates the home’s value for your lender. The inspector, in contrast, evaluates the home’s condition for you. HUD’s form puts it plainly: “An appraisal is required to estimate the home’s value for your lender and does not replace a home inspection.” (For the appraisal side, see what a home appraisal costs.)
FHA lenders must give buyers that form, HUD-92564-CN, “For Your Protection: Get a Home Inspection.” HUD Handbook 4000.1 (section II.A.1.a.ii(A)(3)) says lenders must provide it “at first contact, be it for pre-qualification, pre-approval, or initial application.” The form (HUD-92564-CN) makes several points every buyer should know:
- An inspection happens only if you arrange one. FHA does not perform them.
- FHA does not guarantee the value or condition of the home.
- If you find problems after closing, FHA cannot give or lend you money for repairs.
- If you ask for an inspection early, you may be able to make the purchase contract contingent on the result.
The report also gives you negotiating ground. Say the inspector finds an aging water heater and a leak under the kitchen sink. You now have a written basis to ask the seller for a repair, a credit or a lower price.
New construction needs an inspection too. A city or county sign-off shows the work passed the local code inspection. Still, it is not a full report to you on the finished home’s condition, so a builder’s new house deserves the same independent look.
What a home inspector checks, and what they do not
According to the HUD form, an inspector evaluates the home’s physical condition and estimates the remaining useful life of the major systems, equipment, structure and finishes. The inspector also identifies items that need repair or replacement. A standard inspection usually covers the following. To see the exact scope, ask for the inspector’s Standards of Practice, as HUD suggests.
| Area | What the inspector typically looks at |
|---|---|
| Roof | Covering, flashing, gutters, signs of leaks |
| Foundation and structure | Cracks, settling, framing you can see |
| Plumbing | Supply and drain lines, water heater, fixtures |
| Electrical | Service panel, wiring you can see, outlets |
| Heating and cooling | Furnace, air conditioner, ducts, age and operation |
| Windows and doors | Operation, seals, damage |
| Interior | Walls, ceilings, floors, stairs |
| Attic and insulation | Ventilation, insulation, signs of moisture |
| Drainage and grading | Whether water flows away from the house |
The inspection is visual. So the inspector reports what can be seen and safely reached, and does not open walls or move the seller’s belongings. Ask for the inspector’s list of exclusions before you book.
Tests that usually cost extra
The HUD form tells buyers to ask whether more tests are relevant for the home. These include radon, mold, air or water quality, asbestos, lead paint, urea formaldehyde insulation and pests. Many buyers also add a sewer line camera scope, a pool inspection or a well and septic check where they apply. Because each of these is a separate service, each usually carries its own fee.
Once you know what the inspection will cover, the next step is lining up your financing so the timeline holds.
What a home inspection costs and how long it takes
HomeAdvisor’s 2026 figures put an average inspection at $344, with most between $296 and $425. Larger homes, big-city markets and add-on tests such as radon or mold cost more. Prices also differ by area, so get two or three quotes.
The buyer usually pays the inspector directly, according to HomeAdvisor. Since the fee is paid separately before closing, it usually does not appear among your closing costs.
Plan on a few hours on site. The time grows with the size and age of the home, and add-on tests can stretch it further. Block out the whole visit, because you should go along (more on that below).
How to find a good home inspector
To choose a home inspector, start with the basics that HUD’s form lists: references from friends, real estate professionals, local licensing authorities and organizations that qualify and test home inspectors. Then narrow the list with a few checks.
Check qualifications and insurance
Many states license inspectors, although the rules and exams differ. Check your state’s licensing board to confirm the license is active. Keep in mind that a license is a minimum standard, not a sign of skill.
Next, ask how many inspections the person has done and whether inspecting is a full-time job. Also ask what insurance the inspector carries, such as general liability and errors and omissions coverage. Find out what it covers if the inspector misses something.
Ask for a sample report and the standards the inspector follows
HUD suggests asking for the inspector’s Standards of Practice or a sample report. Compare sample reports from two or three inspectors. A useful report has clear photos, plain descriptions and a note on how urgent each item is. Ask what the inspection excludes and which add-on tests the inspector offers.
Be careful with referrals
An agent’s recommendation can be fine. Even so, an agent may have a stake in the sale going through, so get at least one other name from a source with no stake in the deal. Then compare them on the points above.
Go to the inspection
Plan to attend, and save your questions for the end. Walking the house with the inspector shows you where the shutoff valves and service panel are. It also helps you understand which problems are serious and which are routine upkeep. Ask the inspector to point out any signs of leaks or water damage, such as stains or damp areas, and to say how serious each one is.
What to do with the inspection report
Most reports run long, and nearly every house has a list. Sort the findings into three groups: safety issues and major defects, repairs that should happen soon, and normal maintenance. Focus your requests on the first group.
Ask for repairs, a credit or a lower price
With an inspection contingency in your contract, you can usually ask the seller to make repairs, give a credit toward closing costs or lower the price. Hypothetically, a buyer whose report shows a furnace near the end of its life might ask for a credit rather than a rushed repair. The seller does not have to fix anything unless the contract says so. Instead, the two sides negotiate. Our guide to a contingent offer explains how these clauses work.
Know your deadline and when to walk away
Your contract sets the inspection window, not a fixed rule, so book the inspector right after the seller accepts. If the report turns up a problem you cannot accept and the seller will not budge, the contingency may let you cancel. See what happens after your offer is accepted for where the inspection fits in the timeline to closing.
If you skipped the inspection
You can still hire an inspector after you move in. Alternatively, some inspectors offer a shorter maintenance walk-through. Either way, you get a list of what to fix and a rough sense of when, before small problems grow.
Chinese drywall and other hidden hazards
A standard inspection looks for visible defects. Some hazards need a separate test, so ask the inspector which ones they screen for.
What Chinese drywall is and how to tell if a home has it
“Chinese drywall” is the common name for problem drywall that gave off sulfur gases and corroded copper in homes. According to the U.S. Consumer Product Safety Commission (CPSC), the boards emitted elevated levels of hydrogen sulfide, carbonyl sulfide or carbon disulfide. Homeowners largely reported homes built in 2006 to 2007, during a surge in new construction.
The CPSC uses a two-step test. Step one is a visual check that must show both of these:
- Blackened copper electrical wiring or air conditioning evaporator coils.
- Drywall installed between 2001 and 2009.
Step two looks for corroborating evidence. For drywall installed from 2005 to 2009, the home needs at least two of these signs. For 2001 to 2004, it needs at least four:
- Elemental sulfur in the drywall core (lab test).
- Copper sulfide on test strips, ground wires or coils (lab test).
- Elevated sulfide gas emissions from the drywall (lab test).
- Corrosion of copper placed with drywall samples in a test chamber (lab test).
- Chinese markings on the back of the drywall. (Markings may not be visible.)
Not all drywall from China is problem drywall, according to the CPSC’s identification guide. Residents reported symptoms such as irritated eyes and skin, difficulty breathing, a persistent cough and recurring headaches.
What to do about Chinese drywall
CPSC has not recalled the drywall. Instead, the Drywall Safety Act of 2012 (Public Law 112-266, approved January 14, 2013) made an industry labeling standard a federal rule. It also directed CPSC to limit sulfur content in drywall unless a qualifying voluntary industry standard did so. CPSC says it has completed its investigation, and the identification page links to its remediation guidance.
A standard inspection does not include this screening, so ask the inspector whether they check for it. If problem drywall turns up, call your homeowner’s insurer, and check any contractor with your state and local authorities. The CPSC also notes there are no federally approved test kits, so be wary of firms selling both testing and repairs.
Mold
The EPA’s guide to mold and moisture says molds are part of the natural environment and none grow without water or moisture. That is why the way to control mold is to control moisture. A standard inspector can point out moisture problems such as stains, leaks and damp basements. Mold testing, however, is a separate service. If the report flags water damage, ask whether testing makes sense.
Asbestos and lead paint
Until the 1970s, many building products and insulation materials in homes contained asbestos, according to the CPSC. Breathing high levels of the fibers raises the risk of lung cancer, mesothelioma and asbestosis. Material in good condition is often best left alone, so do not disturb it. If it is damaged, or you plan work that would disturb it, hire a trained, qualified asbestos professional to sample, repair or remove it.
Lead paint follows a similar pattern. The federal government banned lead-based paint for home use in 1978. EPA estimates that 87% of homes built before 1940 and 69% of those built from 1940 to 1959 are likely to have it. For most pre-1978 homes, sellers must disclose known lead paint and give buyers 10 days to test, unless the buyer waives it or both sides agree in writing to another period.
Radon
Radon is a gas you cannot see or smell. EPA and the Surgeon General recommend testing all houses for it, as the HUD form notes. According to EPA’s radon page, radon is the number one cause of lung cancer among non-smokers and the second leading cause overall. EPA says to fix a home at 4 picocuries per liter (pCi/L) or above and to consider fixing between 2 and 4 pCi/L. A radon test is usually an add-on. Ask the inspector whether they offer one or can refer a qualified tester.
Is a home inspection worth it?
For most buyers, yes. The fee is small next to the price of the house, the down payment and the cost of a missed roof, furnace or foundation problem. FHA cannot lend you money for repairs you find after closing, and an appraisal is not a substitute for a condition inspection. So the inspection is often your only detailed look at the home’s condition before you commit.
With the inspection booked, the next step is comparing loan offers so your financing is ready by closing.
Frequently asked questions
Is a home inspection worth it?
For most buyers, it is. An inspection costs a few hundred dollars and can surface repairs that cost far more. It also gives you a written basis to ask the seller for repairs, a credit or a lower price.
Is a home inspection required?
Usually not. FHA, VA and USDA loans do not require one, although your lender or your contract can. FHA lenders must give you HUD’s form urging one, and FHA does not inspect the home for you.
How much does a home inspection cost?
HomeAdvisor’s 2026 figures put the average at $344, with most between $296 and $425. Larger homes, big-city markets and add-on tests such as radon or mold cost more.
How do I find a good home inspector?
Get names from friends, your agent, your state’s licensing board and inspector organizations. Then check the license, experience and insurance, and compare sample reports. Go along on the day of the inspection.
How can I tell if a house has Chinese drywall?
Look for blackened copper wiring or air conditioning coils in a house with drywall installed between 2001 and 2009. The CPSC then calls for corroborating evidence, which often includes lab tests. Ask your inspector whether they screen for it, because a standard inspection does not.
Is an appraisal the same as a home inspection?
No. An appraisal estimates the home’s value for your lender, while an inspection checks its condition for you. HUD’s form states that an appraisal does not replace an inspection. If your appraisal comes in short, see our guide to a low appraisal.