Covered front porch with white columns looking out over a quiet tree-lined street
On this page
  1. How to remove PMI on a conventional loan: three routes
  2. Check which kind of mortgage insurance you pay
  3. When PMI ends on its own at 78%
  4. Remove PMI at 80% of your home’s original value
  5. Remove PMI based on your home’s current value
  6. Example: when PMI could come off a $350,000 home
  7. How to ask your servicer to remove PMI
  8. Do you have to refinance to remove PMI?
  9. FHA mortgage insurance and the PMI executive order
  10. PMI removal FAQ
  11. Your next step

You can remove PMI from a conventional loan three ways. It ends automatically once your loan’s schedule reaches 78% of the home’s original value. You can also ask for it to end at 80%, or ask based on today’s value once the loan is at least two years old. Once you meet one of these tests, you usually do not need to refinance.

PMI is private mortgage insurance, the coverage you pay for when you borrow more than 80% of the home’s value on a conventional loan. These rules apply to borrower-paid PMI only. FHA loans follow other rules, covered in our guide to getting rid of FHA mortgage insurance. Our guide to how much PMI costs shows what you could save each month.

How to remove PMI on a conventional loan: three routes

The Homeowners Protection Act (HPA) sets the first two routes. Fannie Mae and Freddie Mac add the third for loans they own.

RouteWho actsWhenWhat you need
Automatic terminationYour servicer, with no requestYour original schedule reaches 78% of original valuePayments current on that date
Request at 80%YouBalance reaches 80% of original value, on schedule or through extra paymentsWritten request, good payment record, no second lien, proof the value has not dropped
Request on current valueYouLoan 2 to 5 years old at 75% LTV, or older than 5 years at 80%A new valuation at your cost and a good payment record

LTV means loan-to-value ratio: your balance divided by the home’s value. Your servicer, the company that collects your payment, handles all three routes.

Check which kind of mortgage insurance you pay

The HPA defines private mortgage insurance as any mortgage insurance other than FHA, VA or USDA coverage (12 U.S.C. 4901(13)). Its cancellation rights cover loans on a single-family principal residence that closed on or after July 29, 1999, according to the CFPB.

If you have a conventional loan and your monthly payment includes a mortgage insurance charge, you pay borrower-paid PMI and this article applies. An FHA or USDA loan also adds a monthly charge, but that is government mortgage insurance, not PMI. If your lender paid the premium in exchange for a higher rate, you have lender-paid mortgage insurance. The CFPB notes that different rules apply to it, and the cancellation rights below do not cover it.

Second homes and investment properties fall outside the HPA, although Fannie Mae applies its own rules to them.

When PMI ends on its own at 78%

Your servicer must end PMI on the date your original amortization schedule first shows the balance at 78% of the home’s original value (12 U.S.C. 4901(18) and 4902(b)). Because that date comes from the schedule alone, extra payments do not move it.

You must be current on that date. If you are behind, PMI ends on the first day of the month after you catch up. For Fannie Mae loans, “current” means you paid the payment due the month before the termination date by the end of the month it was due. In addition, the servicer cannot charge you a fee for an automatic termination (Fannie Mae Servicing Guide B-8.1-04).

As a backstop, 12 U.S.C. 4902(c) says PMI ends no later than the first day of the month after the midpoint of the loan term, which is year 15 on a 30-year loan, if you are current. The CFPB says this mostly affects interest-only, principal forbearance or balloon loans.

At closing, the lender had to give you a PMI disclosure with your termination date (12 U.S.C. 4903(a)). After that, your servicer must send an annual written statement of your cancellation rights (4903(a)(3)). Loans classed as high risk at closing follow a different schedule under 4902(g), and that disclosure says whether yours is one.

Remove PMI at 80% of your home’s original value

Under 12 U.S.C. 4902(a), you can ask your servicer to cancel PMI once your balance reaches 80% of the original value. You pick the measure: the date your original schedule reaches 80%, or the date your actual balance gets there. Extra principal payments therefore let you request PMI cancellation sooner. See our guide to paying off your mortgage early.

“Original value” is the lower of the contract sales price or the appraised value when you bought. If you refinanced, it is the appraisal used for that refinance (12 U.S.C. 4901(12)).

What the servicer needs from you

The servicer must grant the request when you meet these conditions:

  • A written request. The HPA right starts with a request in writing to the servicer.
  • A good payment history. That means no payment 30 or more days late in the last 12 months, and none 60 or more days late in the 12 months before that (4901(4)).
  • Current payments when you ask.
  • No second lien. If the loan holder requires it, you certify that your equity is not “encumbered by a subordinate lien,” such as a second mortgage or home equity line.
  • Proof of value. Likewise, the holder can ask for evidence that the home’s value has not fallen below the original value.

How the servicer checks value

On a Fannie Mae loan, the servicer first pulls an automated value. If that value is lower than the original value, the servicer denies the request unless you pay down the balance or pay for a broker price opinion (BPO) or appraisal that shows the value held up. If the system returns no value, the servicer denies it unless you pay for a BPO or appraisal.

Neither company sets a minimum loan age for this route (Freddie Mac Guide 8203.2).

Remove PMI based on your home’s current value

If your home has gained value, Fannie Mae and Freddie Mac let you request cancellation based on a new valuation. The HPA does not require this route. The rules below are Fannie Mae and Freddie Mac rules for loans they own.

PropertyLoan ageMaximum LTV on current value
One-unit principal residence or second home2 to 5 years75%
One-unit principal residence or second homeMore than 5 years80%
Same, with substantial improvementsNo 2-year wait80%
1–4 unit investment property or 2–4 unit principal residence (Fannie Mae)More than 2 years70%

Sources: Fannie Mae B-8.1-04; Freddie Mac 8203.2(b).

Here, the LTV uses your current balance and the new value. You also need the same payment record as the 80% route. Freddie Mac adds one test: no other default under your mortgage in the last 12 months, such as unpaid property taxes.

Improvements that count

Both companies waive the two-year wait when improvements raised the value. Fannie Mae counts renovations that “substantially improve marketability and extend the useful life” of the home, such as a kitchen or bath remodel or added square footage, but not routine repairs. Freddie Mac also requires the work to meet building codes.

What the valuation costs

You pay for the valuation, and it must include an interior and exterior inspection. Freddie Mac requires it within 120 days of your request. For loans Fannie Mae owns, its Servicing Guide F-1-02 (Guide published Oct. 14, 2026) sets these fees, and the servicer orders the valuation only after you pay:

  • BPO: $190
  • Restricted appraisal, one unit: $450
  • Appraisal, 2–4 units: $750

Other investors may charge different amounts.

Servicers may contact you, but you still ask

Since September 2026, Fannie Mae servicers may contact borrowers who look close to the current-value limit (Lender Letter LL-2026-07). Freddie Mac already lets servicers notify these borrowers. Either way, PMI comes off only after you ask.

According to the CFPB, investor rules cannot be less favorable than the HPA.

Example: when PMI could come off a $350,000 home

This is an illustration only. Say a buyer pays $350,000 with 10% down ($35,000), so the original value is $350,000 and the loan is $315,000 (90% LTV). Assume a 30-year fixed loan at 6.5%, an example rate and not a quote. Principal and interest come to about $1,991 a month, before taxes, insurance and PMI.

TestBalanceResult in this example
Request at 80% of original value$280,000Reached after payment 95, about 7 years 11 months
Automatic at 78% of original value$273,000Reached after payment 109, about 9 years 1 month
Current value, 2 to 5 years (75%)About $299,400 after 48 paymentsHome must be valued at about $399,300, 14% above the price
Current value, over 5 years (80%)About $294,500 after 61 paymentsHome must be valued at about $368,100, 5% above the price

Your servicer works from your own loan terms, so your dates will differ.

How to ask your servicer to remove PMI

  1. Find your dates. Look for the PMI disclosure from closing or the annual statement. If you can’t find either, ask your servicer.
  2. Learn who owns the loan. Fannie Mae and Freddie Mac each offer an online loan lookup tool, and ownership tells you which rules apply. If neither company owns your loan, ask your servicer which rules it follows.
  3. Check your record. Look for late payments in the last 24 months and any second mortgage or home equity line.
  4. Send a written request. Fannie Mae and Freddie Mac accept verbal requests, but the HPA right attaches to a written one. Keep a dated copy.
  5. Pay for the valuation if asked. Before you pay, get the valuation type and fee in writing.
  6. Track the deadlines. PMI charges must stop within 30 days after the later of your request or the date you meet the evidence and certification rules (12 U.S.C. 4902(e)). Unearned premiums must come back within 45 days after PMI ends (4902(f)).
  7. Check the new payment. The servicer may run an escrow analysis, so the drop may differ from your PMI amount if taxes or insurance also changed.

Do you have to refinance to remove PMI?

No. The three routes above all work on your current loan once you meet their tests. Still, a refinance can also drop PMI. Freddie Mac (Guide section 4701.1) and Fannie Mae (Selling Guide B7-1-01) require mortgage insurance on a conventional first mortgage they buy only when the LTV is above 80%. (Fannie Mae also allows another approved form of credit enhancement.) As a result, a new loan at 80% or less of a new appraisal needs no PMI.

A refinance has real costs, though. You pay closing costs (see our guide to the cost to refinance), take a new rate and restart your loan term. For context, Freddie Mac’s weekly survey put the average 30-year fixed rate at 7.11% on November 12, 2026, up from 6.24% a year earlier.

If your current rate is lower than a new loan’s rate, refinancing just to drop PMI gives up that lower rate. In that case, ask your servicer about a current-value request first, since it costs one valuation fee instead of closing costs.

Refinancing to remove PMI makes more sense when a new loan’s rate is at or below your current rate, or when you would refinance anyway. It can also help when your loan’s investor offers no current-value route. Our conventional refinance guide covers the requirements.

FHA mortgage insurance and the PMI executive order

FHA loans carry mortgage insurance premiums (MIP), and the HPA does not apply to them. For FHA case numbers assigned on or after June 3, 2013, with a term over 15 years, annual MIP lasts 11 years if the LTV was 90% or less at closing. Otherwise, it lasts for the full term (HUD Handbook 4000.1, III.A.1.k.iii and Appendix 1.0).

Executive Order 14438, signed Oct. 22, 2026, lets FHFA consider a pilot in which Fannie Mae and Freddie Mac would cancel PMI on their own. However, it would apply only to loans made after the pilot starts, and it does not change today’s rules for anyone who already pays PMI. Read our story on the PMI cancellation executive order.

PMI removal FAQ

Can I remove PMI without refinancing?

Yes. All three routes above work on your existing loan once you meet their tests. A refinance is one more option, but it adds closing costs.

Do you have to wait two years to remove PMI?

Not for the 80% route. The two-year wait is part of the Fannie Mae and Freddie Mac current-value rules, and both waive it for substantial improvements if the LTV is 80% or less.

What if my home value dropped?

Then the 80% request can fail, because the holder can require proof the value has not fallen. However, automatic termination at 78% uses only your schedule, so a lower value does not block it.

Does PMI go away automatically?

Yes, on the date your original schedule shows the balance at 78% of the original value, if you are current. If you are behind then, it ends the month after you catch up.

Do conventional loans require PMI?

Usually, when you borrow more than 80% of the home’s value, because Fannie Mae and Freddie Mac generally require mortgage insurance above that level. Still shopping? See how to avoid PMI.

Can you remove PMI with a second mortgage or HELOC?

It is harder. The HPA lets the holder require you to certify that your equity is not “encumbered by a subordinate lien,” so ask your servicer how it treats yours. A second lien also affects a later refinance, as our guide to HCLTV and HTLTV explains.

Your next step

You can often get rid of PMI without a new loan. First, compare your balance with 80% of your original value. If your home has gained value and the loan is at least two years old, ask your servicer whether a current-value request could end PMI sooner, and what it costs.