On this page
- How much down payment you need to avoid PMI
- Ways to avoid PMI without 20% down
- VA loans: avoid PMI with no down payment
- USDA loans: zero down with guarantee fees instead of PMI
- FHA loans: no PMI, but FHA mortgage insurance
- Piggyback loans and lender-paid mortgage insurance
- 3% down conventional loans still have PMI
- How to get rid of PMI later
- How to choose a low down payment mortgage with no PMI
- FAQ
Private mortgage insurance (PMI) protects the lender on a conventional loan, and the rules Fannie Mae and Freddie Mac follow require it when the loan is more than 80% of the home’s value. So a 20% down payment is the plain way to skip it. If you want to avoid PMI without 20% down, VA and USDA loans charge no PMI, while FHA loans carry their own mortgage insurance. Two conventional workarounds also exist: a piggyback second loan and lender-paid mortgage insurance.
Each route has its own cost:
- VA loan: no down payment required and no monthly mortgage insurance, but borrowers who are not exempt pay a one-time funding fee.
- USDA loan: no down payment and no PMI, but an upfront fee and an annual fee apply.
- FHA loan: 3.5% down with a 580 credit score, plus FHA mortgage insurance (MIP) instead of PMI.
- Piggyback loan: a second mortgage covers part of the down payment, so the first loan carries no PMI.
- Lender-paid mortgage insurance: no PMI line on your statement, but usually a higher rate.
- A 20% down payment: no PMI on a conventional loan.
How much down payment you need to avoid PMI
Fannie Mae’s Selling Guide, section B7-1-01 requires mortgage insurance on a conventional first mortgage with a loan-to-value ratio above 80%, unless the lender uses another approved form of credit enhancement. Freddie Mac’s Guide sets the same 80% line. Loan-to-value (LTV) is the loan amount divided by the home’s value. On a purchase, that value is the lower of the sales price and the appraised value.
As a result, you cannot avoid PMI without 20% down on a standard conventional loan. Say a buyer purchases a $400,000 home that appraises at the sales price:
- 20% down ($80,000): the $320,000 loan is 80% LTV, so no PMI applies.
- 10% down ($40,000): the $360,000 loan is 90% LTV, so PMI applies.
- 3% down ($12,000): the $388,000 loan is 97% LTV, so PMI also applies.
PMI applies only to conventional loans, though. FHA loans charge a mortgage insurance premium (MIP), VA loans charge no monthly mortgage insurance, and USDA loans charge guarantee fees.
Ways to avoid PMI without 20% down
The table below compares five ways to avoid PMI without 20% down, plus 20% down itself. Every option except 20% down asks you to pay in a different form, so read the last column closely.
| Option | Down payment | Mortgage insurance | What you pay instead |
|---|---|---|---|
| VA loan | None required in most cases if the price is not above the appraised value (loan limits can apply) | No PMI or MIP | One-time funding fee of 1.25% to 3.3%, unless exempt |
| USDA loan | None | No PMI | Upfront fee of 1% plus an annual fee of 0.35% |
| FHA loan | 3.5% with a credit score of 580 or higher | FHA MIP, not PMI | Upfront MIP of 1.75% plus annual MIP of 0.50% to 0.55% on most loans |
| 80/10/10 piggyback | 10% | No PMI on the first loan | A second loan with its own rate, payment and closing costs |
| Lender-paid mortgage insurance | Less than 20% | No monthly PMI line | Usually a higher interest rate; varies by lender |
| 20% down | 20% | None | The cash up front |
Eligibility narrows the list quickly. VA loans need qualifying military service, and USDA loans need an eligible rural property and a household income within the limit. The other options depend on your credit and income.
Since rates and fees vary by lender for every option here, compare offers for the loan types you qualify for.
VA loans: avoid PMI with no down payment
A VA-backed purchase loan often lets a borrower with qualifying military service buy with no down payment, as long as the sales price is not higher than the appraised value. According to VA.gov, these loans also need no PMI and no MIP. In other words, a VA loan lets an eligible buyer avoid PMI without 20% down and without any down payment at all.
Instead of mortgage insurance, VA borrowers who are not exempt pay a one-time funding fee. VA sets the fee by your down payment and by whether you have used the benefit before:
| Down payment | First use | After first use |
|---|---|---|
| Less than 5% | 2.15% | 3.3% |
| 5% or more | 1.5% | 1.5% |
| 10% or more | 1.25% | 1.25% |
You can pay the fee at closing or include it in the loan and pay it over time. Say a first-time VA borrower buys a $350,000 home with no money down. The funding fee would be 2.15% of the $350,000 loan, or $7,525. With 10% down, the fee drops to 1.25% of a $315,000 loan, or $3,937.50.
Some borrowers are exempt from the fee, such as veterans who receive VA disability compensation. VA also sets no minimum credit score, although lenders set their own. See the MMI guide to VA home loans for service requirements and the full fee rules.
USDA loans: zero down with guarantee fees instead of PMI
USDA guaranteed loans offer 100% financing based on the appraised value, so you can buy with no down payment. That lets an eligible buyer avoid PMI without 20% down. However, USDA Rural Development charges two guarantee fees, and they are a different charge from PMI.
USDA’s January 2026 program guide lists the current fees:
- Upfront guarantee fee: 1% of the loan amount. You can finance it, and USDA may change it, but not above 3.5%.
- Annual fee: 0.35% a year, based on the average scheduled unpaid principal balance.
Say a buyer takes out a $300,000 USDA loan. The upfront fee would be $3,000. The annual fee starts at roughly $1,050 a year (about $87.50 a month), then shrinks as the balance falls.
The property must be in an eligible rural area. Household income must also be within USDA’s limit for the county and household size (about 115% of median income). You can check an address and your income with the eligibility tools linked from the USDA guaranteed loan program page. USDA sets no credit score requirement, but lenders apply their own standards. For the full rules, see the MMI guide to USDA home loans.
FHA loans: no PMI, but FHA mortgage insurance
An FHA loan has no PMI. Instead, FHA charges its own mortgage insurance premium (MIP), so a search for an “FHA loan without PMI” tells only half the story. HUD Handbook 4000.1, Appendix 1.0, sets two charges:
- Upfront MIP: 1.75% of the base loan amount.
- Annual MIP: on loans with terms over 15 years and base loan amounts at or below the level in HUD’s table, 0.55% when the LTV is above 95% and 0.50% at 95% or less. Larger loans pay 0.70% to 0.75%.
Your credit score sets the minimum down payment. Under Handbook 4000.1 (II.A.2), a minimum decision credit score of 580 or higher qualifies for maximum financing. On a purchase, that means 96.5% LTV, or 3.5% down. A score from 500 to 579 limits the loan to 90% LTV, so you need 10% down.
The down payment also decides how long MIP lasts. With 10% down (an LTV of 90% or less), FHA mortgage insurance ends after 11 years. With less down, it stays for the life of the loan unless you refinance or pay off the loan.
Say a buyer with a 600 score buys a $300,000 home with 3.5% ($10,500) down. The base loan is $289,500, so the upfront MIP is $5,066.25. Annual MIP at 0.55% would start at about $1,592 a year, or roughly $133 a month. This example covers mortgage insurance only, not principal, interest, property taxes or homeowners insurance.
To see your options for ending it, read how to get rid of mortgage insurance on an FHA loan.
Piggyback loans and lender-paid mortgage insurance
Both let a conventional borrower avoid PMI without 20% down, at least as a separate monthly charge. Still, each one moves the cost somewhere else.
Piggyback loan (80/10/10)
A piggyback loan pairs a first mortgage at 80% of the price with a second mortgage that covers part of the down payment. Because the first loan stays at 80% LTV, it sits at the level where Fannie Mae requires no mortgage insurance. Fannie Mae also has the lender calculate both the LTV and the combined loan-to-value (CLTV) when a second loan sits behind the first.
On a $400,000 home, an 80/10/10 setup would be a $320,000 first mortgage, a $40,000 second mortgage and a $40,000 down payment. In exchange, the second loan carries its own rate, payment and closing costs. Lenders may also cap the combined loan-to-value. The 80/10/10 piggyback mortgage guide explains how the two loans work together.
Lender-paid mortgage insurance
With lender-paid mortgage insurance (LPMI), the lender buys the coverage as its own obligation. Fannie Mae requires the lender to keep that coverage in effect until the borrower pays off the loan.
You see no PMI line on your statement. However, the lender usually builds the cost into a higher interest rate or fees. You also cannot cancel it the way you can cancel borrower-paid PMI, because the federal cancellation rules do not apply when the lender pays. So compare the full cost over the years you expect to keep the loan. The MMI guide to lender-paid mortgage insurance walks through that comparison.
3% down conventional loans still have PMI
Many lenders offer conventional loans with 3% down. These loans help with the down payment, but they do not remove PMI, because 3% down leaves a 97% LTV. In short, no conventional loan with 3% down is free of mortgage insurance. With lender-paid coverage you pay no monthly PMI line, but the cost moves into the rate. Credit score rules depend on the underwriting method and on each lender, so ask before you apply.
Conventional 97
Lenders call Fannie Mae’s standard 97% LTV option for a one-unit, fixed-rate purchase “Conventional 97.” Unless the loan is HomeReady or uses Community Seconds financing, at least one borrower must be a first-time home buyer.
HomeReady
HomeReady is Fannie Mae’s program for lower-income buyers, and it also allows 97% LTV. Qualifying income may not exceed 80% of the area median income (AMI) for the property’s location. Fannie Mae also requires homeownership education on a purchase when all occupying borrowers are first-time buyers.
Home Possible
Freddie Mac offers Home Possible, with a 97% maximum LTV on a one-unit home with a fixed rate. Like HomeReady, it caps qualifying income at 80% of the AMI. Freddie Mac’s Guide sets mortgage insurance rules for Home Possible loans, so PMI still applies above 80% LTV.
How to get rid of PMI later
If you choose a conventional loan with PMI, the Homeowners Protection Act sets when it ends. According to the CFPB, these rules cover single-family principal residences with loans that closed on or after July 29, 1999:
- At 80%, on request: you can ask the servicer to cancel PMI when the balance is scheduled to reach 80% of the original value, or sooner with extra payments. You must ask in writing, have a good payment history, certify that you have no junior liens, and show that the value has not dropped.
- At 78%, automatically: the servicer must end PMI when the balance is scheduled to reach 78% of the original value, as long as you are current.
- At the midpoint: the servicer must end PMI the month after the loan reaches the midpoint of its schedule, which is 15 years on a 30-year loan.
“Original value” generally means the lower of the contract price and the appraised value at purchase. FHA and VA loans follow different rules, and lender-paid mortgage insurance does too. Fannie Mae and Freddie Mac may also have more favorable guidelines. For the steps, see how to remove PMI.
How to choose a low down payment mortgage with no PMI
Start with the loans you qualify for, then compare the cost in two ways. First, compare the monthly payment, including any mortgage insurance or annual fee. Then compare the total cost over the years you expect to keep the loan, including upfront fees and the rate.
Ask each lender for a Loan Estimate on the same loan type, price and down payment. That way the fees, rate and mortgage insurance line up side by side. For example, weigh a VA funding fee paid once against FHA annual MIP that runs for the life of the loan, over the years you expect to stay.
A low credit score narrows the field, but it does not close it. VA and USDA set no minimum score, and FHA allows 3.5% down at 580. Still, lenders set their own minimums, so ask each one for a quote before you apply.
FAQ
How can I avoid PMI without 20% down?
Use a VA loan if you have qualifying military service, or a USDA loan if you buy in an eligible rural area and meet the income limit. Neither one charges PMI. On a conventional loan, a piggyback second mortgage or lender-paid mortgage insurance also removes the monthly PMI charge, at a different cost.
How much down payment do I need to avoid PMI?
On a conventional loan, you need 20% down, which makes the loan 80% of the home’s value. VA and USDA loans charge no PMI, so they need no down payment for PMI reasons. FHA loans, however, charge MIP at any down payment.
Can I avoid PMI with 10% down?
On a standard conventional loan, no: a loan at 90% LTV needs PMI. Instead, you can pair 10% down with an 80/10/10 piggyback loan or choose lender-paid mortgage insurance. With a VA loan, 10% down also lowers the funding fee to 1.25%.
Is there a no PMI loan with 3% down?
No conventional loan with 3% down skips mortgage insurance, including Conventional 97, HomeReady and Home Possible. Lender-paid coverage only moves the cost into your rate. VA and USDA loans allow 0% down with no PMI. FHA loans need 3.5% down with a 580 score, and they charge MIP.
Can I avoid PMI with a low credit score?
Possibly. VA and USDA set no minimum credit score, and FHA allows 3.5% down with a score of 580 (or 10% down with a score from 500 to 579). However, credit score rules also depend on the underwriting method and on each lender, so ask before you apply.